Although painting the walls is the most common in most homes, it is also possible to decorate a wallpapered room. It is an option used especially in bedrooms or children’s playrooms, but you can also choose to wallpaper the living room or some other room. To do this, we want to explain in detail how to wallpaper a room.
Before wallpapering a room, it will be essential to remove the wallpaper before putting a new one. To do this, you will have to tear off all the paper and completely remove the remaining remains, as well as the glue marks.
Steps to wallpaper a room
You should also make sure that all the walls are in perfect condition and that there are no cracks, holes, etc. If this is the case, it will be necessary to fill the gaps with putty or plaster and a spatula; Let it dry completely, then sand the area to make it completely smooth so you can paper the room well. Make sure there are no traces of dust or dirt left on the wall so the wallpaper can stick properly.
Step 1
If the room is humid, it will also be essential to repair them to prevent the wall from peeling and then deteriorating the wallpaper. To do this, you must first know what type of humidity it is and, if it is very widespread, ask for professional help to fix it.
Step 2
Once you have left the walls pristine, you can start wallpapering the walls. To do this, you must make sure you have enough paper to cover the entire room and glue to paper appropriate to the type of paper you will use. In any decoration store or DIY center, they can advise you.
The wallpaper glue’s preparation can vary depending on the manufacturer, in terms of the amount of water to add or the time it must rest before using it. Therefore, you must follow the instructions that are detailed on the packaging.
Step 3
You must measure the wall and cut the pieces or strips of paper, leaving a margin of about 10 cm. You must also start to paper the room next to the window – if it has one – and end up in the darkest area.
With the gluing brush, you must apply glue in the middle of each strip of paper. It is important to do it from the center to the edges and emphasizing the corners. Next, you will have to fold the strip of paper to match the other half and penetrate the glue.
Step 4
The next step will be to take the paper by the upper end and keep it folded in half so that it does not stick to the bottom of the wall before time. Get on a ladder and start gluing the wall to the top, leaving a margin of about 4 cm on the ceiling. Go papering the wall from top to bottom and from the center to the corners, to remove air and prevent bubbles from forming.
Step 5
Pay attention when splicing the wallpaper strips, since they should not be mounted on each other, but coupled. Also, look at the drawing or design so that some strips correspond to each other.
In the same way, with the help of a cutter and a ruler, you should cut the excess paper in the area of the plinth and ceiling. It will be necessary to let the wallpaper air dry, which is, do not try to speed it up with fans or stoves. It is important to apply the vinyl glue only to the wall.
The wallpaper is an interesting option to decorate a wall and not only for decorating, but also to cover very dirty or old walls. Wallpaper can be a perfect choice to cover the living room or children’s room. Do not use the same glue to paper all kinds of papers. You must also apply the glue to the wall or to the paper or both depending on each type of paper.
About Author
